Harken Canvas
 

All covers (with the exception of our cockpit cover) feature 10" skirts that end below the gunwale edge and secure with 3/16" sewn-in shockcord for a snug fit. Heavy-duty nylon webbing tabs with eyelets for tie downs are sewn into the gunnel seams so no metal touches your boat. We use high quality materials and UV resistant thread.
 

Travel Deck Cover

TRAVEL DECK COVER

Use this no-rig flat deck cover when trailering or storing your boat. The cover is reinforced at the mast, stay areas (where applicable), cleats and eyestraps to prevent wear.

Fabrics available:
AQUALON®™
SOFTOUCH®
HARBOR-TIME™

 

Mooring Cover

TRAVEL/MOORING COVER*

This cover works well for both trailering and mast-up mooring. Reinforced cutouts with YKK® buckle closures at stays and wrap-around mast collar with draw cord closures ensure a snug fit. Webbing loop(s) let you tent the cover by tying it to the boom. A durable UV-resistant polyester zipper runs from the mast to the sidestay or forestay, allowing easy on and off.

* Cover does not go over the boom

Fabrics available:
AQUALON®™
HARBOR-TIME™

 

Mooring Cover

MOORING COVER

This full-deck mast-up mooring cover fits over the boom. The cover is reinforced at fittings and other critical pressure points. Vents fore and aft circulate air to minimize condensation. Heavy-duty UV-resistant polyester zippers run to the mast and sidestays. Convenient YKK® buckle closures at the bow, with quick release buckles at bow and sidestay hem for easy on and off. The wrap-around mast collar with ties offers additional protection.

Fabrics available:
AQUALON®™
SUNBRELLA®/OUTDURA®
HARBOR-TIME™

 

Hull Cover

HULL COVER

Our hull covers are built for tough trailering. Large reinforcement patches protect your boat’s bow and stern corners. Mesh-covered drain holes.

Fabrics available:
AQUALON®™
SOFTOUCH
HARBOR-TIME™

Cockpit Cover

COCKPIT COVER

This cockpit tent cover installs from the front of the mast to the end of the boom. A reinforced pocket cups the boom end to prevent wear. The cover’s hem is also reinforced. Eyelets with tie downs secure the cover. A heavy-duty polyester zipper makes it easy to take on and off.

Fabrics available:
AQUALON®™
HARBOR-TIME™
SUNBRELLA®/OUTDURA®

 

Envelope

ENVELOPE

The envelope is a combination deck and hull cover designed for long-distance trailering or storage. The cover is sewn together from the bow to the sidestays. From the sidestays aft, the cover is open. The deck flap features a reinforced hem and eyelets through which ¼” line laces to hooks on the hull flap to secure the cover. Three or four heavy-duty webbing tabs on the aft deck flap are used to tent the cover and keep it from pocketing water.

Fabrics available:
AQUALON®™
SOFTOUCH
HARBOR-TIME™